Set Up a Deebot in One Pass
Setting up a Deebot takes one ordered pass. In the owner guides we publish here, the pairing half of a Deebot setup can be exact and the mapping half cannot. Ecovacs publishes its network requirements centrally and leaves map editing to each model's own manual. Charge it on the dock. Pair it in the ECOVACS HOME app on a 2.4 GHz network, then let it map the floor before you send it at single rooms.
Preparation begins on the smartphone before powering the vacuum. Download the latest version of the ECOVACS HOME app and enable permissions for Data, Wi-Fi, and Location, including GPS or GPRS, in the phone's system settings. Ecovacs directs owners to connect the phone to the home Wi-Fi network and temporarily disable cellular data, whether 4G or 5G, before starting the pairing flow.
The official first-run sequence inside the app follows a fixed path: Add Device, Connect to Home Wi-Fi, Turn On, and Press the Reset button. Follow each step in order to ensure the robot registers properly on the home network.
- Connect your mobile phone to your home 2.4 GHz Wi-Fi network and disable cellular data.
- Open the ECOVACS HOME app, grant network and location permissions, and select Add Device.
- Turn on the Deebot and press the Reset button.
- Wait for the voice prompt stating 'Entering network setup mode', then tap Next in the app.
- Wait for the Deebot to announce 'DEEBOT is connected to your phone' and 'Please return to the App and wait for the network setup to complete'.
- Let the setup percentage complete in the app until the Wi-Fi LED shows solid illumination.
What Your Router Has to Do
Ecovacs robots require a 2.4 GHz network connection using the 802.11b/g/n protocol with IPv4. According to Ecovacs Wi-Fi connection troubleshooting, network setup is only applicable to 2.4 GHz band routers. The hardware cannot complete pairing on a 5 GHz band, on hidden network names, or through connections that require web portal authentication.
Network credentials and broadcast channels must match specific criteria. Ecovacs recommends using standard English letters or numbers for your Wi-Fi password. In North America, the robot supports channels 1 through 11, alongside channels 12 and 13 where local administrator policies permit. Connections routed through a VPN or proxy server are not supported and must be turned off during pairing.
If the setup process stalls midway, verify the phone's wireless connection. When setup passes 50 percent, confirm the mobile phone remains connected to the network assigned to the Deebot rather than drifting back to mobile data or a separate band. Some Android handsets object once the phone joins the robot's temporary ECOVACS_xxxx hotspot, showing a prompt that says it is unable to connect to WLAN. Answer Do Not Switch, decline the offer of a better network, and confirm you want to keep using this one. If your robot experiences operational faults or hardware errors after setup, consult our guide on Ecovacs Deebot troubleshooting.
| Router setup | What Ecovacs says | What to change |
|---|---|---|
| Dual-band with band steering | Support mix network of 2.4GHz/5GHz | Activate band steering so the two networks integrate into one SSID |
| Separate 2.4 GHz and 5 GHz SSIDs | Setup only applicable to 2.4GHZ band | Select the 2.4 GHz network and ignore or forget the 5 GHz SSID on your phone |
| Hidden SSID broadcast | The robot does not support hidden SSID network | Set the network SSID visibility to broadcast so it is visible to smartphones |
| Enterprise or guest portal | Does not support web authentication or certification | Connect to a network without web authentication or certification |
| Mesh or multi-router system | Ecovacs publishes no single mesh procedure; it keeps separate articles for mesh Wi-Fi and for multiple or cascaded routers | Follow the article for your own topology in the Ecovacs Wi-Fi support index |
The First Map and What It Unlocks
The ECOVACS HOME app uses the initial map to target rooms, areas and objects. The ECOVACS HOME app support center explains that owners can view the full map of their home and use it to select specific rooms, areas, and objects for the robot to clean in, around, or under. To see how these mapping systems compare across the industry, read our overview of how robot vacuums navigate.
Let the first mapping cycle finish before you send the robot at single rooms. The app targets rooms, areas and objects off that map, so until the map exists there is nothing for a room-by-room job to point at.
Mapping features vary according to the specific hardware tier you own. Ecovacs notes that some Deebot series do not feature 3D Mapping functionality, meaning visual options depend on your product generation. Note that performing a network reset erases this saved floor plan alongside your network credentials.
Account Handover and Resetting
Transferring an Ecovacs Deebot to a different app account takes one long press of the reset button. Per instructions for why a Deebot is offline, press the reset button for around 10 seconds. The robot then resets and powers on with the Wi-Fi LED flashing, ending the existing pairing and clearing the saved map.
Ecovacs publishes no central guide for sharing a robot with a second person. Sharing is per-model. To find sharing options available for your specific unit, check the ECOVACS HOME app, or open your model's instruction manual from its entry in the Ecovacs Deebot catalog. For broader hardware context, read our Ecovacs Deebot lineup review and our Ecovacs company overview.
Physical controls for running the robot without Wi-Fi vary by model, so check the ECOVACS HOME app, or your model's own manual. Operating without the app prevents using the map to select rooms, areas, and objects for the robot to clean.
Manuals and Model Specific Features
Mopping, map editing and room division work differently from one Deebot series to the next. Ecovacs does not publish a central step-by-step for mop-pad operation, map editing, or quick mapping. These procedures are documented within individual instruction manuals. Each manual is linked from that model's entry on the Ecovacs Deebot catalog.
Because hardware configurations differ between series, owners must consult their exact model manual for details regarding mop-pad operation, dividing or naming rooms, and map editing. For cleaning intervals and the filter, brush, and mop-pad care schedule, follow our robot vacuum maintenance schedule.
Bottom Line
Mop-pad operation, map editing and room naming are per-model, and Ecovacs publishes no central page for any of them. Open your own model's manual from its entry in the Ecovacs Deebot catalog for those steps.
Connect your smartphone to your 2.4 GHz home network, turn off cellular data, and initiate pairing through the ECOVACS HOME app.
FAQs
How do I connect an Ecovacs Deebot to Wi-Fi?
Connect your mobile phone to a 2.4 GHz home network, disable mobile data, and launch the ECOVACS HOME app. Power on the robot, press the Reset button, tap Next after hearing the network setup voice prompt, and follow the on-screen steps. Pairing completes when the robot confirms the connection and the Wi-Fi light stays solid.
Can an Ecovacs Deebot work without Wi-Fi?
Offline controls vary by model. Check the ECOVACS HOME app, or your model's own manual, to see how yours runs without Wi-Fi. Operating without the app prevents viewing the map and selecting specific rooms, areas, and objects to clean.
How do I set up an Ecovacs Deebot for the first time?
Charge the Deebot on its dock and install the ECOVACS HOME app on your smartphone. Grant location and Wi-Fi permissions, switch off cellular data, and select Add Device in the app. Follow the prompts to press the Reset button and let the Deebot connect to your 2.4 GHz home network.
How do I remap or edit the map on an Ecovacs Deebot?
Ecovacs does not publish a universal central guide for editing boundaries or dividing rooms, as mapping tools differ across product models. Map editing features are model-specific and documented in the app or in your model's manual. If you press the reset button for around 10 seconds to hand the robot to another account, the network profile and the saved map are deleted.
How do I share my Ecovacs Deebot with another person?
Sharing is per-model. Ecovacs publishes no unified process for it, so the setting lives in the ECOVACS HOME app or in your own model's manual. To transfer full control of the vacuum to a different account, press the reset button for around 10 seconds and complete the connection process again.