Camsense Sells Six Laser Sensor Lines

Camsense sells four kinds of laser sensors for robot vacuums: triangulation LiDAR, direct time of flight (dTOF) LiDAR, three-dimensional (3D) time of flight (ToF) LiDAR, and line laser sensors. Camsense's full name is Shenzhen Camsense Technology Co., Ltd, and Camsense says on its own site that it develops spatial perception products with a focus on robot vacuums. It also says it designs its own artificial intelligence (AI) spatial-data processing chips, known as application-specific integrated circuits (ASICs), plus its own spatial perception algorithms.

The English product list on Camsense's site names five robotics sensor lines. Its Chinese timeline adds a sixth, the CF-series cliff-detection sensor launched in 2025. The table below uses Camsense's own descriptions, and "Not stated on the product list" marks every cell where Camsense does not say where a part is mounted in a vacuum.

The Camsense pages we read do not list any vacuum model that contains these sensors, so no model list can be given here. Camsense says the sensors are deployed at scale in robot vacuums. It also says it is expanding into virtual reality and augmented reality (VR/AR), industrial and healthcare uses, with some products still at the research and development (R&D) or sample stage.

Product FamilyWhat It DoesWhere It Sits in a Vacuum
P-series LiDARConsumer-grade dTOF LiDAR that scans in two dimensionsNot stated on the product list. Camsense's timeline calls it a lifting 360-degree LiDAR
D3 LiDARCost-effective miniaturized LiDARNot stated on the product list
L-series line laser sensorConsumer-grade single-line laser ranging, suited to robot edge-followingNot stated on the product list
F-series line laser sensorConsumer-grade single-line laser ranging for robot obstacle avoidanceNot stated on the product list
V-series 3D LiDARConsumer-grade 3D ToF LiDARNot stated on the product list
CF-series dTOF sensorCliff detection. Camsense says it overcomes the accuracy and range limits of infrared sensorsNot stated on the product list

Camsense's Own Site Reports About 8 Million LiDAR Units in 2024

Camsense's own site traces its LiDAR business from a first product in 2017 to about 8 million LiDAR units shipped in 2024. Camsense was founded in 2013 and says it entered consumer-grade LiDAR in 2017. In 2018 it launched the Camsense X1 LiDAR, which it claims measures space to within 1 millimeter, along with its first chip, the C1 ASIC.

Camsense says its miniaturized X2 LiDAR, launched in 2020, became a mainstream product for robot vacuums. LiDAR shipments reached 500,000 units that year, by Camsense's count. Mass production of D2-series triangulation LiDAR followed in 2022, and in 2023 Camsense launched the C3 ASIC, the D3-series LiDAR and the L-series line laser sensors, which its timeline describes as obstacle-avoidance sensors.

In 2024 its Huizhou production base began production, and Camsense mass-produced the P-series lifting 360-degree LiDAR. LiDAR shipments reached about 8 million units that year. The site does not say whether each figure is a yearly or a running total.

Camsense says it had 415 employees as of March 31, 2026, with offices or branches in Shenzhen, Huizhou, Zhongshan, Qingdao, Beijing, Hong Kong and Suzhou. Its Chinese page says R&D and technical staff make up over 70% of headquarters staff. Its honors list includes a 2020 technology cooperation award from Dreame and a 2022 national "Little Giant" title for specialized and innovative small enterprises. The award does not say which Dreame models, if any, use Camsense parts.

Prospectus Figures Put Camsense LiDAR Shipments Above 10 Million in 2025

Camsense's cumulative shipments since its founding exceeded 39 million units, according to the prospectus as reported by Tiger Brokers on September 30, 2026. Camsense listed on the Main Board of the Hong Kong Stock Exchange (HKEX) that day under the code 06802.HK. We did not read the HKEX prospectus itself, so every figure in this section comes from that broker report.

In 2025, total LiDAR shipments exceeded 10 million units and line laser sensor shipments exceeded 5 million units, according to the same report. The report says Camsense cites third-party industry data that ranks it first globally by revenue in robot vacuum spatial perception solutions in 2025. Treat that ranking as Camsense's own claim.

Revenue rose from about renminbi (RMB) 332 million in 2023 to about RMB 614 million in 2025. In 2025, triangulation LiDAR made up 65.7% of revenue, line laser sensors 21.8% and dTOF LiDAR 10.6%. The report says Camsense turned profitable only in 2025.

Five customers brought in 80.4% of 2025 revenue, down from 93.6% in 2023, according to the report. The largest customer's share fell from 37.1% to 29.0% over those years, and the report does not name that customer. The report also lists Roborock among Camsense's shareholders as industrial capital, and a shareholding does not show that Roborock buys Camsense LiDAR.

YearRevenueTop Five Customers' ShareLargest Customer's Share
2023About RMB 332 million93.6%37.1%
2024About RMB 433 million89.2%36.1%
2025About RMB 614 million80.4%29.0%

Neither Camsense Nor the Broker Report Names a Vacuum Model

No robot vacuum model that uses Camsense LiDAR is named in the two sources we read. Neither Camsense's site nor the Tiger Brokers report lists a model, names the largest customer, or says whether Roborock or any other vacuum brand buys Camsense parts. In those two sources, the only ties to vacuum brands are the 2020 Dreame award and the Roborock shareholding.

Neither source we read gives unit prices or a map-accuracy figure for any specific vacuum, and neither reports a test result.

If you want to know whose sensor sits in one particular vacuum, two routes can sometimes answer it. Neither route is guaranteed to name the supplier, so if both come up empty, treat the supplier as unknown and compare the vacuum on what its maker does publish.

  • Ask the vacuum maker's support team whether it names its LiDAR supplier for that model.
  • Look for a published teardown of that model, if one exists.

Robot Vacuum Buyers Gain Little from Knowing the Sensor Supplier

In our read, the LiDAR supplier is a weak buying criterion for a robot vacuum because no source publishes it per model. Mapping quality also depends on the vacuum maker's software, which turns the laser's distance readings into a map. Mop, dock and obstacle-avoidance quality are separate questions from who made the LiDAR.

See our guide to how robot vacuums navigate. If obstacle handling matters, start with our list of robot vacuums with obstacle avoidance.

We give no view on the shares in 06802.HK. Readers who want a robot vacuum pick should start in our consumer robots section instead.

Our answer would change if Camsense or a vacuum maker published which models use Camsense LiDAR. With a model-level list, we could name those vacuums, and you could weigh the sensor supplier alongside the rest of each model's specification.

Bottom Line

Camsense is a specialist sensor supplier with more than 39 million units shipped according to the prospectus as reported by Tiger Brokers. In our read, the maker of a vacuum's LiDAR is still not a buying criterion, because no source publishes it per model, and we offer no stock opinion. If you are choosing a robot vacuum, read our guide to how robot vacuums navigate, or ask the vacuum maker's support team whether a given model uses Camsense LiDAR.

Open the Camsense product list to read each robotics sensor line in Camsense's own words.

FAQs

Who is Camsense?

Camsense is Shenzhen Camsense Technology Co., Ltd, a sensor company founded in 2013 that says it develops spatial perception products with a focus on robot vacuums. It sells triangulation, dTOF and 3D ToF LiDAR plus line laser sensors, and says it designs its own processing chips.

Is Camsense publicly traded?

Yes. Camsense listed on the Main Board of the Hong Kong Stock Exchange on September 30, 2026, under the code 06802.HK, according to a Tiger Brokers report. We give no view on the shares.

Which robot vacuums use Camsense LiDAR?

Neither source we read names them. The Camsense pages we read do not list any vacuum model, and the broker report on its listing names no models. Camsense's honors list includes a 2020 technology cooperation award from Dreame, which does not identify any Dreame model.

Do robot vacuums use LiDAR?

Yes, at least some do. Camsense says its LiDAR is deployed at scale in robot vacuums, and the prospectus as reported by Tiger Brokers puts its 2025 LiDAR shipments above 10 million units. Neither source says which vacuum models those units went into.

How does robot vacuum LiDAR mapping work?

A laser measures the distance to surrounding objects, and the vacuum's software turns those readings into a map. In our read, that software layer is one reason the LiDAR supplier alone does not decide map quality.

Can I find out which LiDAR a robot vacuum has?

Sometimes. You can ask the vacuum maker's support team whether it names its sensor supplier, or look for a published teardown of the model, if one exists. Neither route is guaranteed to name the supplier.

Primary Sources