BellaBot Price and What Pudu Publishes
Pudu publishes no BellaBot list price on the product, Pro, trial or company pages covered here. Its US trial page offers BellaBot for $299 over two weeks in Houston, Dallas, San Antonio and Austin. Pudu says other areas beyond 100 miles have additional shipping fees. The trial fee does not establish what you would pay to buy or lease the robot.
Pudu says an official retailer contacts applicants within 2 to 5 work days after registration is confirmed. The retailer agrees on trial dates and the on-site working environment, then visits to deploy BellaBot and complete its initial settings. At the end of the trial, Pudu says installation and shipping are free upon purchase or leasing. Otherwise, the robot is returned at no extra cost.
The trial page also displays "$10/Day for a Usage Period of 5 Years" and "400 Deliveries Per Day." Both are Pudu marketing text; Pudu does not define what the daily figure includes or establish the delivery figure as a measured result. In our arithmetic on Pudu's figure, $10 a day for five years comes to $18,250 ($10 × 365 days × 5 years). That calculation is neither a quoted purchase price nor a lease offer.
Ask the retailer for a written quote that separates the unit, support and installation before treating $10 a day as a price. Ask whether the quoted arrangement is a purchase or a lease. If you are outside the four listed Texas metros, the BellaBot product page offers a Request a Demo option. The $299 trial page does not establish the same offer for your location.
BellaBot Specs From Pudu's Product Page

Pudu lists BellaBot as a four-tray delivery robot with a maximum load of 40 kg and a limit of 10 kg per tray. Both limits matter: a load within the robot's total capacity could still exceed the allowance for one tray. Pudu gives each tray a 41.00 by 50.01 cm footprint, so check the size of the items you would put on it as well as their weight.
Pudu gives BellaBot a 13-hour battery-life figure with no load and a 4.5-hour charging time. The no-load condition makes the 13 hours unsuitable as a promise of service time in a loaded dining room. Pudu also describes a quick battery swap. If continuous service matters to you, ask how battery changes would work in the proposed setup rather than assuming the no-load figure covers a shift.
Pudu lists simultaneous localization and mapping (SLAM) using light detection and ranging (LiDAR) and visual positioning. It also lists three red, green, blue plus depth (RGBD) cameras for obstacle avoidance, with a stop response time "as short as 0.5 seconds." That is Pudu's claim. Pudu publishes no measurement of it in your room. Pudu lists infrared tray sensors and says the trays can be removed quickly. The table keeps Pudu's figures together so you can compare them with your route and loading needs.
| Spec | Pudu's BellaBot figure | Source page |
|---|---|---|
| Machine size | 56.5 × 53.7 × 129 cm | Pudu BellaBot product page |
| Robot weight | 55 kg | Pudu BellaBot product page |
| Load capacity | 40 kg total, 10 kg per tray | Pudu BellaBot product page |
| Tray size | 41.00 × 50.01 cm | Pudu BellaBot product page |
| Battery life | 13 hours with no load | Pudu BellaBot product page |
| Charging time | 4.5 hours | Pudu BellaBot product page |
| Climbing angle | At most 5 degrees | Pudu BellaBot product page |
| Adjustable speed | 0.5 to 1.2 meters per second | Pudu BellaBot product page |
| Positioning | Marker positioning supports a maximum height of 8 meters with optional high-level code. Laser positioning is code-free with no height restriction | Pudu BellaBot product page |
| Navigation and obstacle sensors | LiDAR and visual positioning, three RGBD cameras and LiDAR for obstacle avoidance, and infrared tray sensors | Pudu BellaBot product page |
BellaBot Versus BellaBot Pro
Pudu lists the same 40 kg total load and 10 kg per-tray limit for BellaBot Pro as for BellaBot, and describes an advertising screen built into Pro. Pudu calls Pro a delivery and advertising robot. Its page lists a 10.1-inch and an 18.5-inch liquid crystal display (LCD). If a screen is part of your buying decision, ask to see what would appear on it during the route you plan to use.
Pudu's Pro-page comparison lists a 65 cm path clearance for Pro and 70 cm for BellaBot. The five-centimeter difference can decide which model fits a narrow route: measure the clear aisle rather than the distance between fixed furniture alone. The same comparison gives Pro 11 hours of run-time and BellaBot 13 hours, both with no load. Neither figure establishes loaded run-time during service.
Pudu's two pages differ on BellaBot speed. The BellaBot product page states 0.5 to 1.2 meters per second, while the comparison table on Pudu's Pro page lists 0.2 to 1.2 meters per second for both models. Keep the figures with their respective sources when discussing speed with Pudu. The pages do not explain the difference.
Pudu lists delivery, recycle, cruise, guide and birthday modes for Pro. Its page also describes tray and ambient lights for meal pickup, ground patterns near intersections and autonomous gate passage. Decide whether those listed features serve a job in your room before choosing Pro solely for its narrower clearance.
| Spec | BellaBot | BellaBot Pro | Source |
|---|---|---|---|
| Run-time with no load | 13 hours | 11 hours | Pudu BellaBot Pro comparison table |
| Path clearance | 70 cm | 65 cm | Pudu BellaBot Pro comparison table |
| Cruise speed | 0.2 to 1.2 meters per second | 0.2 to 1.2 meters per second | Pudu BellaBot Pro comparison table |
| Screens | Not listed in Pudu's comparison table | 10.1-inch and 18.5-inch LCDs | Pudu BellaBot Pro page |
| Color | White | White and black | Pudu BellaBot Pro comparison table |
| Carrying capacity | 40 kg total, 10 kg per tray | 40 kg total, 10 kg per tray | Pudu BellaBot Pro comparison table |
| Charging time | 4.5 hours | 4.5 hours | Pudu BellaBot Pro comparison table |
Where BellaBot Fits in a Dining Room
BellaBot fits the stated path requirement when its route has at least 70 cm of clear space, according to Pudu's Pro-page comparison. Pro's listed requirement is 65 cm. Measure the route you would use during service, including turns and places where chairs or people may narrow the passage. Check whether the needed clearance remains available at peak hour.
Pudu's BellaBot page lists a climbing angle of at most 5 degrees. If the route includes a slope, measure its angle before requesting a trial. The page does not address steps, so its slope figure should not be used as a step rating. Use the restaurant robots table-turn test to assess whether food running addresses a bottleneck in your dining room. Bear Robotics Servi is another food runner you can include when requesting quotes.
Pudu's trial page quotes a representative of Chick-fil-A saying, "The robots are being piloted as a helping hand to assist Team Members with serving guests in the dining room." That is pilot wording published by Pudu. It supplies no delivery count or service result. For your own decision, note the kitchen-to-table route and what happens there at peak hour before arranging a demonstration.
Who Should Not Buy One Yet
A dining room with a route narrower than Pudu's listed 70 cm BellaBot clearance should not buy BellaBot without first measuring the clear route during service. If the route is at least 65 cm but under 70 cm, ask Pudu whether BellaBot Pro suits the measured route. Its comparison table lists the smaller clearance. If the route is under 65 cm, neither published clearance figure establishes a fit.
Do not treat Pudu's 5-degree climbing-angle limit as an answer about steps. Pudu's BellaBot page does not address them. Ask Pudu about the actual route before committing to either a trial or an order. The same page does not address hot dishes, so ask about the items you plan to carry rather than inferring suitability from the tray's weight limit.
If your dining room has no food-running bottleneck at peak hour, observe the kitchen-to-table work before paying for a trial. A robot's tray capacity alone does not show that it would relieve work in that room. If you need a published purchase price to approve a budget, Pudu's pages do not provide one. Request comparable written purchase or lease quotes before making BellaBot the budgeted choice.
What Would Change Our Answer
A published BellaBot list price would change the cost assessment because you could compare it directly with a written quote. For now, the $299 trial fee and Pudu's $10-a-day marketing line answer different questions from the purchase or lease cost. Ask the retailer to state what the quoted amount covers, including the unit, support and installation.
A measured peak-hour deployment on the route you plan to use would give you better evidence of fit than Pudu's "400 Deliveries Per Day" marketing line. Arrange the trial around the busy period if the Texas offer applies, and record whether BellaBot can complete the proposed route with the intended tray loads. That observation would apply to your room. It would not turn Pudu's marketing figure into an independently established result.
A route with less than 65 cm of clear space would also change the recommendation. Pudu's comparison gives 65 cm as Pro's requirement and 70 cm as BellaBot's. Neither listed figure establishes a fit below 65 cm. Reconsider the route or ask Pudu about the measured layout before spending money on a robot for that passage.
Bottom Line
BellaBot is worth a trial if your restaurant has long kitchen-to-table runs and at least 70 cm of clear aisle space at peak hour. Pudu lists the $299 two-week trial for Houston, Dallas, San Antonio and Austin. Elsewhere, its BellaBot page offers a Request a Demo option. Ask the retailer for a written quote covering the unit, support and installation before treating Pudu's $10-a-day marketing line as a price. The specifications and offers here reflect Pudu's pages as read on November 13, 2026, and can change.
Use the Request a Demo option on Pudu's BellaBot product page, then ask for a written quote that names the unit, support and installation.
FAQs
What does BellaBot do?
BellaBot runs deliveries using four trays, with a Pudu-listed limit of 10 kg per tray and 40 kg in total. Pudu describes it as a delivery and engagement robot for restaurants and retail. Its product page also lists infrared tray sensors and calls through the PUDU Link app, a push-button caller or a 4G watch.
How does BellaBot navigate?
Pudu says BellaBot uses LiDAR and visual positioning for SLAM navigation. Its page also lists three RGBD cameras and LiDAR for obstacle avoidance. Pudu describes marker positioning with an optional high-level code and code-free laser positioning. Ask which setup is proposed for your route.
How much does a BellaBot cost?
Pudu publishes no BellaBot list price. Its US trial page lists $299 for two weeks in Houston, Dallas, San Antonio and Austin. The page's "$10/Day for a Usage Period of 5 Years" is marketing text with undefined inclusions. Our calculation of $10 × 365 days × 5 years is $18,250, which is not a quoted purchase or lease price.
What is the difference between BellaBot and BellaBot Pro?
Pudu's Pro-page comparison gives BellaBot 13 hours of no-load run-time and a 70 cm path clearance, against 11 hours and 65 cm for Pro. Pro's page lists two LCD screens, and the comparison lists BellaBot in white and Pro in white and black. Pudu's BellaBot page states a 0.5 to 1.2 meters-per-second speed range, while its Pro-page comparison lists 0.2 to 1.2 for both. The two pages differ.
Where is BellaBot made?
Pudu does not identify which factory assembles BellaBot. Its company page lists a global headquarters in Shenzhen and factories in Jiangsu, Zhejiang and Jiangxi, without assigning BellaBot to one of them. The Pudu Robotics page covers Pudu's headquarters, product families and funding.
Can BellaBot carry hot dishes up steps?
Pudu's BellaBot page lists a 10 kg limit per tray and a climbing angle of at most 5 degrees. It does not address hot dishes or steps. Ask Pudu about the dishes and route you intend to use. A slope limit does not establish how BellaBot handles a step.