Raspberry Pi Alternatives Compared by Price and Fit

Entry prices come from each maker's own website. Processors and memory sizes are the figures each maker lists for that board.

ProductBilling unit and entry priceBest fit
Raspberry Pi 5From $45 per board on the Raspberry Pi products listing; quad-core Arm Cortex-A76 at 2.4GHz; 1GB to 16GB of memory; 5V 5A USB-C supplyGeneral-purpose Linux robot computer with the widest accessory range
Arduino UNO Q 2GB$59.00 per board; quad-core Cortex-A53 at 2.0 GHz plus a microcontroller unit (MCU); 2GB memory; 16GB embedded MultiMediaCard (eMMC) storageLinux and real-time motor control on one board
Orange Pi 5Quote-based; no public price; Rockchip RK3588S; 4GB, 8GB or 16GB memory; neural processing unit (NPU) rated at 6 trillion operations per second (TOPS)Low-cost vision and NPU workloads on a Linux board
Radxa ROCK 5BQuote-based; no public price; sold through approved partners; NPU up to 6 TOPSHigh-performance board for vision and AI robots
BeagleBone BlackQuote-based; no public price; 1 GHz Cortex-A8; 512 MB memory; 4 GB eMMC; two 200 MHz programmable real-time units (PRUs)Linux with PRU cores for deterministic motor and sensor timing
NVIDIA Jetson Orin Nano Super Developer KitQuote-based; no public price; 67 TOPS at 8-bit integer precision; 8GB memory; 7W to 25W power rangeOn-robot GPU perception and ROS workloads
Espressif ESP32-DevKitCQuote-based; no public price; dual-core Xtensa at 240 MHz (ESP32 series); 4 MB flash; all pins exposedWireless sensor and motor nodes beside a main computer

Are you one of these vendors? Update your listing

Prices checked on each vendor's own website on Nov 13, 2026.

How to Choose a Raspberry Pi Alternative

Start with the job the board has to do. Linux boards run ROS, cameras and networking. Microcontrollers handle motors and sensors on a fixed schedule. A few boards, such as the Arduino UNO Q, combine both. After the job, compare the memory ceiling, the power supply the robot's battery has to feed, the operating system images the maker lists, and whether the maker publishes a price at all.

Want to be added to this alternatives page?

Contact us

Arduino UNO Q

The Arduino UNO Q puts two processors on one board. A Qualcomm Dragonwing QRB2210 quad-core Arm Cortex-A53 at 2.0 GHz runs Debian Linux, and an STM32U585 Arm Cortex-M33 microcontroller at up to 160 MHz runs the Arduino Core on the Zephyr operating system for real-time work. Arduino's US store lists the 2GB model at $59.00 with 2GB of low-power DDR4 (LPDDR4) memory, 16GB of eMMC storage, Wi-Fi 5, Bluetooth 5.1, one USB-C port and a Qwiic connector for I2C (Inter-Integrated Circuit) sensors. Arduino also sells a 4GB model, but its page shows no price or full specification for it.

It fits builders who want the microcontroller to time the motors while Linux handles networking and software. It falls short of a Raspberry Pi in memory range, since the 2GB model is the only size priced, against 1GB to 16GB on the Raspberry Pi 5, and in core design, because the Pi 5 uses higher-performance Cortex-A76 cores at 2.4GHz.

Cost example: a Raspberry Pi 5 at the $45 entry price plus a Raspberry Pi Pico 2 microcontroller board at $5 totals $50 for two boards. The UNO Q 2GB costs $59.00 for one board, a $9 difference for the single-board layout.

Orange Pi 5

Orange Pi lists the Orange Pi 5 with a Rockchip RK3588S eight-core processor (four Cortex-A76 cores at up to 2.4GHz and four Cortex-A55 cores at 1.8GHz), an Arm Mali-G610 GPU and a built-in NPU with up to 6 TOPS. Memory comes as 4GB, 8GB or 16GB. The board has a 26-pin header, and Orange Pi lists expansion for Universal Asynchronous Receiver-Transmitter (UART), pulse-width modulation (PWM), Serial Peripheral Interface (SPI), Controller Area Network (CAN) and general-purpose input/output (GPIO) signals. It also has an M.2 slot with Peripheral Component Interconnect Express (PCIe) 2.0 for a Non-Volatile Memory Express (NVMe) solid-state drive, Gigabit Ethernet, one USB 3.0 port, two USB 2.0 ports and a Type-C input rated 5V at 4A. Orange Pi links to AliExpress and Amazon stores and shows no price.

It fits builders who want more vision compute than a Raspberry Pi 5 carries on the board itself. It falls short in the operating system list, which names Orange Pi OS, Ubuntu, Debian and Android 12, and in the header, which has 26 pins against the 40 on the Raspberry Pi 5. Orange Pi lists Wi-Fi 6 and Bluetooth 5.0 only as an optional M.2 module.

Cost example: a Raspberry Pi 5 from $45 plus the $200 Raspberry Pi AI HAT+ 2 add-on board totals $245 before power supply and storage. The Orange Pi 5 builds its NPU into the board, but with no public price the two totals cannot be compared.

Radxa ROCK 5B

Radxa describes the ROCK 5B with quad Cortex-A76 and quad Cortex-A55 cores on an 8nm process, an Arm Mali-G610 MC4 GPU and an NPU of up to 6 TOPS. It decodes H.265, H.264, VP9, AV1 and AVS2 video up to 8K at 60 frames per second and encodes H.264 and H.265 up to 8K at 30. Ports include HDMI, DisplayPort over Type-C, camera and display connectors on the Mobile Industry Processor Interface (MIPI), and a 2.5G Ethernet port whose Power over Ethernet (PoE) support needs an additional PoE HAT (hardware attached on top). Radxa sells the board through approved partners and shows no price.

It fits teams that want a camera-heavy AI robot on a compact Linux board. It falls short of a Raspberry Pi in published detail: Radxa's page does not state memory sizes, onboard storage or a GPIO header layout.

Power example: the Raspberry Pi 5 asks for 5V at 5A, which is 25W. Radxa lists a 30W Power Delivery (PD) adapter among its accessories, which is 5W above the Pi 5 figure.

BeagleBone Black

BeagleBoard.org lists the BeagleBone Black with a Texas Instruments Sitara AM3358 at 1 GHz (Arm Cortex-A8), 512 MB of double data rate 3L (DDR3L) memory, 4 GB of eMMC storage and two 32-bit PRUs at 200 MHz. Two 46-pin headers carry LCD, UART, SPI, I2C, PWM and analog-to-digital converter (ADC) signals. Other ports are a microSD slot, one USB 2.0 host port rated 500 mA, 10/100 Ethernet, HDMI and a 6-pin serial header. Power arrives by Mini-USB, a DC jack or 5 V on the header. The page links to Digi-Key, Mouser and Newark and shows no price.

It fits builders who want precise pulse timing from the PRUs while Linux runs on the same chip. At 200 MHz one PRU clock cycle lasts 5 nanoseconds, so the timing does not depend on Linux scheduling. It falls short of a Raspberry Pi in memory, at 512 MB against up to 16GB, in network speed, at 10/100 against Gigabit Ethernet, and in processor, with a single 1 GHz core against four cores at 2.4GHz.

NVIDIA Jetson Orin Nano Super Developer Kit

NVIDIA lists 67 TOPS at 8-bit integer (INT8) precision, an Ampere GPU with 1024 Compute Unified Device Architecture (CUDA) cores and 32 tensor cores, a six-core Arm Cortex-A78AE processor and 8GB of 128-bit low-power DDR5 (LPDDR5) memory with 102 GB/s of bandwidth. The page gives a 7W to 25W power range, an SD card slot and support for external NVMe storage. Software includes the JetPack SDK (software development kit) and NVIDIA tools such as Isaac ROS and Isaac Sim. NVIDIA directs buyers to partners or its store and shows no price.

It fits robots that run neural-network perception on board. At 67 TOPS against 6 TOPS on the Orange Pi 5 and Radxa ROCK 5B pages, the Jetson is rated roughly 11 times higher. It falls short of a Raspberry Pi on power and price visibility. A battery has to supply up to 25W, the same figure as the Pi 5's 5V 5A supply, and the single 8GB memory size is below the Pi 5's 16GB ceiling.

Cost example: a Raspberry Pi 5 from $45 plus the $200 AI HAT+ 2 totals $245. The Jetson page shows no price, so no total can be compared.

Espressif ESP32-DevKitC

Espressif describes the ESP32-DevKitC as an entry-level ESP32 development board with all pins exposed. Its ESP32 series header lists a dual-core 32-bit Xtensa processor at 240 MHz, and the board lists 4 MB of flash and no extra PSRAM (pseudo-static RAM). The page shows no price for it and links to AliExpress, DigiKey, Mouser and Amazon US. For neighbouring boards Espressif shows a sample price for reference, including $9 for the ESP32-C6-DevKitC-1-N8 and $17 for the ESP32-S3-DevKitC-1-N32R16V.

It fits wireless sensor and motor nodes that sit beside a main computer, such as a bump-sensor board or a servo controller on a robot arm. It falls short of a Raspberry Pi because the page lists no Linux image, no camera or display connectors and no memory for running ROS on the board.

Cost example using a different Espressif board: a Raspberry Pi 5 at $45 plus three ESP32-C6-DevKitC-1-N8 nodes at $9 each costs $72, with the Pi 5 running ROS and the nodes reading sensors.

Who This Is Not For

This page lists boards, so it does not serve readers who want a finished robot. A robot vacuum, a coding kit or a humanoid is a different purchase from a bare board. It also does not serve buyers who need a binding price today, because five of the seven rows show no public price and the quotes come from stores and partners. Only Raspberry Pi states a supply commitment among the boards checked, with Pi 5 production listed until at least January 2036, so readers who need long-term supply dates from other makers find none here. Teams built around Raspberry Pi accessories also gain little here, since the Orange Pi 5 header has 26 pins against 40 on the Pi 5.

What Would Change Our Answer

The comparison changes when the published facts change. A public price from Orange Pi, Radxa, BeagleBoard.org, NVIDIA or Espressif would replace "Quote-based; no public price" and allow a true cost comparison with the Pi 5's $45 starting price. A price for the Arduino UNO Q 4GB would show whether the larger memory size closes the gap with the Raspberry Pi 5. A new operating system image for the Orange Pi 5, which now lists Debian 11 and Android 12, would weaken the software gap. A Raspberry Pi price rise would move every cost example on this page.

When Raspberry Pi Is Still the Better Fit

A Raspberry Pi 5 is a general-purpose Linux computer that Raspberry Pi lists from $45. It carries a quad-core Arm Cortex-A76 processor at 2.4GHz, 1GB to 16GB of low-power DDR4X (LPDDR4X) memory, a 40-pin header, dual-band Wi-Fi, Bluetooth 5.0, Gigabit Ethernet and a PCIe 2.0 interface for storage. The Pi 5 page lists the Trixie and Bookworm operating system releases and production until at least January 2036.

Raspberry Pi also publishes prices for the parts around the board: the Pico 2 microcontroller from $5, the Camera Module 3 sensor assembly from $15 and the AI HAT+ 2 at $200. A builder who wants every part priced in one place gets that here, and the Zero 2 W, a quad-core Cortex-A53 board with 512MB of memory, covers small builds that Raspberry Pi describes as a $15 computer.

Verdict

Raspberry Pi is one board family among several used in robot builds. Linux plus real-time control on one board matches the Arduino UNO Q at $59.00. Vision-heavy robots match the Jetson Orin Nano Super Developer Kit, Orange Pi 5 and Radxa ROCK 5B, whose makers publish no price. Deterministic timing matches the BeagleBone Black, and wireless sensor nodes match the ESP32-DevKitC.

The Raspberry Pi 5 stays the reference at $45 from the Raspberry Pi products listing, and the table above holds every published figure for these Raspberry Pi alternatives.

FAQs

Which Raspberry Pi alternative has a published price?

The Arduino UNO Q 2GB is listed at $59.00 on Arduino's US store. Orange Pi, Radxa, BeagleBoard.org, NVIDIA and Espressif show no price for the Orange Pi 5, ROCK 5B, BeagleBone Black, Jetson Orin Nano Super Developer Kit and ESP32-DevKitC pages checked for this comparison. Raspberry Pi lists its own Pi 5 from $45.

Is the Arduino UNO Q cheaper than a Raspberry Pi 5?

No. The UNO Q 2GB is listed at $59.00 and the Raspberry Pi 5 from $45, a $14 gap at entry prices. The UNO Q adds a microcontroller on the same board, while a Pi 5 setup needs a separate board such as the Pico 2 at $5 for that role, which brings the Raspberry Pi total to $50.

Which Raspberry Pi alternatives include an AI accelerator?

The Orange Pi 5 and Radxa ROCK 5B list an NPU with up to 6 TOPS. The NVIDIA Jetson Orin Nano Super Developer Kit lists 67 TOPS at 8-bit integer precision. Raspberry Pi sells the AI HAT+ 2 add-on board at $200 for the Pi 5.

Can an ESP32 replace a Raspberry Pi in a robot?

Only for tasks that do not need Linux. Espressif lists the ESP32-DevKitC with an ESP32 series dual-core Xtensa at 240 MHz and all pins exposed, which suits sensor and motor nodes. The page lists no Linux support, so a robot that runs ROS keeps a Linux computer as its main board.

Why do most alternatives show no price?

Orange Pi, Radxa, BeagleBoard.org, NVIDIA and Espressif link to stores, distributors or partners instead of listing a price on the product pages checked. The table therefore says "Quote-based; no public price" for those boards.

Related guides