What Neufangled Robotics Sells
Neufangled Robotics sells one product in two forms: an assembled Stringman at $795 and a DIY hardware kit at $655. Neufangled's documentation says Stringman can self-calibrate in a new room and run policies.
The Register describes Nathaniel Nifong as the founder of Neufangled Robotics and reports that users can also control Stringman by hand. It quotes Neufangled as prioritizing robots that are narrowly effective at something that helps today over general-purpose robots.
Neufangled Robotics does not publish its founding year, headquarters location, total funding or the number of units delivered. At The Bot Scout, we have not tested a Stringman and have not spoken to Neufangled Robotics or any of its customers.
What the $795 Base Price Buys
The assembled Stringman robot sells for $795 on the Neufangled Robotics store, described as a complete system ready for installation and calibration in your room. Neufangled Robotics also lists a self-build DIY Stringman Hardware Kit for $655, though the storefront marked that package sold out in November 2026. The store states that customers must pick either the assembled option or the kit package, rather than ordering both together.
The storefront lists a lead time of four weeks. Neufangled Robotics does not publish warranty terms, formal return policies, or shipping charges on its retail pages. Additional individual components appear in the catalog, including an Actuator Hat for $22, custom printed circuit boards (PCBs) and wires for $55, and a branded trucker cap for $24.
Neufangled's public bill of materials (BOM) puts a single kit at $645.57 at the batch sizes it buys in. A builder buying one set of parts should expect to pay more. The five largest lines are:
- $264.30 for four DAMIAO DM-H6215 hub motors
- $58.50 for two standard Raspberry Pi camera modules and $38.50 for one wide module
- $50.00 for two Raspberry Pi 3A+ boards
- $43.09 for two STS3215 smart servos
- $39.40 for two 24V 5A power supplies
Stringman Physical Reach and Payload Limits
Stringman operates inside rooms measuring between 3 m and 10 m across the floor diagonal, requiring ceiling clearances from 2.3 m to 4 m. Movement relies on four DM-H6215 direct-drive actuators installed at the upper corners of the workspace. These motors pull lightweight suspension lines to traverse the room at horizontal velocities of roughly 0.4 m/s.
The gripper weighs 638 g and lifts up to 2.2 kg near floor level, about 1.9 kg on average. Stringman mounts on wood-stud-backed drywall or plaster walls, or is strapped to structural columns. Its parts are 3D-printed, with PET-GF for structural pieces and PLA for decorative ones.
Stringman uses three cameras. Two anchor units carry 1920x1080 resolution sensors capturing video at 30 frames per second, while the traveling gripper holds a wide-angle 684x384 camera operating at 60 frames per second. Users can position optional physical fiducial tags across the floor to mark drop bins and off-limits items.
Safety Systems and Public Prototype Status
Neufangled's documentation, as quoted by The Register, says Stringman is not yet reliable enough to be called a home appliance. Neufangled Robotics publishes no task success rates.
Mechanical safety depends on an automatic line tension release threshold. When tension reaches 28 N, the lines relax automatically. Neufangled Robotics' documentation compares this 28 N limit to the weight of a backpack.
The Register quotes founder Nathaniel Nifong: "I live with two of these, and I've walked into the lines before. It's startling, but harmless." Neufangled says Stringman has about 1,000 hours of testing in real homes and gives no further detail.
Open Source Hardware and Local Compute Requirements
Neufangled Robotics calls Stringman an open-source, air-gappable robotic platform holding certification from the Open Source Hardware Association (OSHWA). Neufangled Robotics hosts its mechanical computer-aided design (CAD) files, PCB schematics, and motion control repositories on GitHub. However, the documentation does not identify the specific legal software or hardware license governing those repositories. For broader open builds, consult our directory of open-source robots.
Local execution does not depend on a cloud service. Neufangled says the controller and AI models run on the owner's own hardware, with an external PC doing the control work. A Raspberry Pi Zero 2W sits in the gripper on 2.4 GHz Wi-Fi, and the anchors use Raspberry Pi 3A+ boards on 5 GHz Wi-Fi.
The Register says that to build your own Stringman you need:
- a 3D printer
- a supplier to manufacture the printed circuit boards (PCBs), motors, Raspberry Pis and other components
- a dedicated PC or Mac to run the motion-control software
Neufangled Robotics Stringman Fact Sheet
| Item | What the sources say | Source |
|---|---|---|
| Assembled system price | $795 fully assembled, ready for mounting and calibration | Neufangled Robotics store |
| DIY hardware kit price | $655 (listed as sold out on 9 November 2026) | Neufangled Robotics store |
| Store delivery lead time | 4 weeks listed on store header; shipping terms not published | Neufangled Robotics store |
| Batch bill of materials cost | $645.57 per kit at commercial batch pricing | Neufangled Robotics bill of materials |
| Operational room size | 3 m to 10 m floor diagonal; 2.3 m to 4 m ceiling heights | Neufangled Robotics |
| Payload capacity | Up to 2.2 kg near floor level; about 1.9 kg average | Neufangled Robotics |
| Maximum traverse speed | About 0.4 m/s | Neufangled Robotics |
| Primary motors | Four DAMIAO DM-H6215 direct-drive hub actuators ($264.30 total batch cost) | Neufangled Robotics bill of materials |
| Camera hardware | Two 1920x1080, 30 frames per second anchor cameras; one 684x384 60 frames per second gripper camera | Neufangled Robotics |
| Line safety limit | Lines relax automatically when tension hits 28 N (compared to a backpack) | Neufangled Robotics |
| Residential testing claim | About 1,000 hours in real homes (company claim, no detail given) | Neufangled Robotics |
| Open source credentials | OSHWA certified claim; GitHub code and CAD published; license name not published | Neufangled Robotics |
| Founder identity | Nathaniel Nifong | The Register |
| Warranty and returns | Not published | Neufangled Robotics store |
| Headquarters and funding | Not published | Neufangled Robotics |
| Task success rate | Not published | Neufangled Robotics |
Purchasing Considerations and Evaluator Fit
Stringman suits software researchers, robotics hobbyists, and tinkerers who want a hackable, open-source cable robot and can build, mount and calibrate it themselves.
Prospective buyers seeking a turnkey home appliance should not buy this system. The hardware requires mounting on walls or structural columns, a dedicated external computer, and patience with experimental control policies. Neufangled Robotics has not published warranty or return terms or independent test results.
Our assessment would shift if Neufangled Robotics published repeatable, audited task success rates, formal consumer warranty terms, or independent test results. Until then, Stringman suits builders who want to experiment. If you want a finished tidying robot instead, start with our household chores guide.
Recent news
A dated log of developments, each tied to its primary source.
- 2026-11-06, IEEE Spectrum's Video Friday commentary called Stringman "such a novel and underrated form factor for a household robot" and listed it at $795. IEEE Spectrum
- 2026-11-04, The Register reported that Neufangled's documentation calls Stringman a public prototype that is not yet reliable enough to be called a home appliance, and that it lists at $795. The Register
Bottom Line
Neufangled says the $795 assembled Stringman is an open-source cable robot that can pick up objects across a wide room. The Register reports that its documentation calls it a public prototype, which limits its appeal. Consumers wanting a dependable chore appliance should not purchase it. That verdict would change only if Neufangled Robotics released verified task reliability figures, transparent customer warranty policies, and independent laboratory test data.
Learn about building open manipulation hardware in our open-source robots guide.
FAQs
What is Stringman?
Stringman is a room-scale cable robot developed by Neufangled Robotics. Four ceiling-corner motors pull lines attached to a suspended gripper, allowing it to move objects around the room and lift up to 2.2 kg near the floor.
How much does the Stringman robot cost?
The assembled Stringman robot costs $795 through the Neufangled Robotics online store with a listed four-week lead time. Neufangled Robotics also lists an unassembled DIY Hardware Kit for $655, though it was marked sold out in November 2026.
Is Stringman open source?
Yes, Neufangled Robotics advertises Stringman as OSHWA certified open-source hardware. Neufangled Robotics hosts mechanical CAD models, PCB designs, and motion software on GitHub, though it does not name the specific license governing those assets.
Is Stringman ready to use as a home appliance?
No. The Register reports that Neufangled's documentation calls Stringman a public prototype that is not yet reliable enough to be called a home appliance. It also needs an external computer to run its motion-control software.
How much can Stringman lift?
Stringman can lift payloads weighing up to 2.2 kg when grasping items near the floor. The average is about 1.9 kg.
Can Stringman run without the cloud?
Yes, Stringman is designed to operate completely air-gapped on a local network. Neufangled says the controller and AI models run on the owner's own hardware, with an external PC doing the control work.